Gold Dedectors Eliminator
Comment/Read (0 comment)
Stock Code
GNSWX238
Warranty Period
24 Year
Market Price
300
Money Transfer
17.123,04 TL
(%8,00 bank transfer discount)
18.612,00 TL
Installments starting from 1.985,28 TL!
Eliminator E-120 can be used in two ways:
A. Once the target is detected and centered with the long range locator, the Eliminator E-120 can be placed on the ground over the center of the target.
|Place Eliminator E-120 in working position above target center
and wait 5 minutes |Then make another detection with the long range locator |If no reading is received, the target is false and has been disabled by the E-120.
B. Your unit can also work with a long range locator.
|Eliminator E-120 at a distance of 10 meters from the point where you will start detecting
place on the ground |Turn on the Eliminator E-120. Wait 5 minutes before turning on the long range locator |Turn on the long range locator.
False signals will be disabled so they do not cause confusion.
WORKING METHOD
1. Insert the ground shaft into the soil to a depth of at least 25cm. Make sure the shaft is firmly seated.
2. Connect the main unit body to the ground shaft.
3. Tighten the spiral connector by hand to ensure a solid connection.
4. Turn on the Eliminator E-120. Adjust the knob to the desired point.
As the knob is turned clockwise, smaller targets are disabled.
5. Wait for 5 minutes and detect using the long range locator.
A. Once the target is detected and centered with the long range locator, the Eliminator E-120 can be placed on the ground over the center of the target.
|Place Eliminator E-120 in working position above target center
and wait 5 minutes |Then make another detection with the long range locator |If no reading is received, the target is false and has been disabled by the E-120.
B. Your unit can also work with a long range locator.
|Eliminator E-120 at a distance of 10 meters from the point where you will start detecting
place on the ground |Turn on the Eliminator E-120. Wait 5 minutes before turning on the long range locator |Turn on the long range locator.
False signals will be disabled so they do not cause confusion.
WORKING METHOD
1. Insert the ground shaft into the soil to a depth of at least 25cm. Make sure the shaft is firmly seated.
2. Connect the main unit body to the ground shaft.
3. Tighten the spiral connector by hand to ensure a solid connection.
4. Turn on the Eliminator E-120. Adjust the knob to the desired point.
As the knob is turned clockwise, smaller targets are disabled.
5. Wait for 5 minutes and detect using the long range locator.
Be the first to comment on this product!